This beautifully crafted Neo-Classic entry door is made in solid Quarter Sawn White Oak. The doorcase is 2 3/8″ thick and fitted with six (6) raised panel assemblies on the exterior and six (6) on the interior. The double panel construction is to allow the interior and exterior of the door panel assemblies to expand and contract at different rates as the temperature varies in each environment.
The door frame is traditional mortise and tenon construction and assembled using West System Epoxy. The center section of the raised panels were resawn then booked matched to create a dynamic pattern and are surrounded by two sets of classical moldings. The door was finished using natural MinWax stain followed by a thinned down epoxy primer and top coated with Epifanes Varnish.
The Custom Oak entry door and flanking sash windows were designed and custom made for a 1905 House located in Traverse City, Michigan. The design of the door was based on the existing pair of doors at the front of the house. The doors are part of a new rear entry porch and mudroom designed by Ekocite Architecture of Royal Oak, MI for this important historic house. The door is 90″ H x 36″ W x 2.25″ thick.
The design of the beveled glass window is based on the existing front door. The door case is mortise and tenon construction and double panel construction below the lock rail. The exterior panel is rift cut Red Oak selected for its dimensional stability. The interior panels are cut and carefully grain matched across the door system from a wide plank of figured Red Oak. The architectural and construction details of the door and sash windows are based on existing millwork in this historical home. The antique mortise door lock that matches the existing front door lock I found in Los Angles Architectural salvage shop.
.
Custom Breakfront Cabinet in the center was handmade to match a pair of antique Apothecary cabinets from the early 19c. Originally the antique cabinets were used Pharmacy in Traverse City, Michigan. Length 24′ x 9′ in Height. The center cabinet handmade in Red Oak features four glass doors in the top section. The arched rail above the widescreen television was developed from similar but smaller rail in the far left antique cabinet. The lower section features sliding doors on custom hardware that match the vintage cases. The antique cabinets were retrofitted with Douglas Fir beadboard backs along with the new cabinet. The pair of antique cabinets before restoration is shown below.